Gray convoy S21A with luminus sst40 ,copper DTP board and ar-coated inside, Temperature protection,21700 flashlight,torch light


Price:

PARAMETER

Material:  Aluminum Alloy

LED: luminus sst40 6500K white tint and 5000K neutral white

Low voltage warning:  Yes

Reverse polarity protection:  Yes

Lens type:  Ar-coated glass lens

Reflector: orange peel

Mode memory: Yes

Tailstand:  Yes

Battery included:  No

Required battery type:  21700 or 18650 lithium battery 

Required battery quantity: 1pcs

Driver: 4 modes 0.1%-3%-30%-100% / 12groups, max current output 6000mA, Temperature protection management inside

Length / Diameter : 123mm / 26.6mm

Weight: 88g    

 

 

Driver instructions:(4modes)

Now we offer another driver version, which has a simple 4 modes for switching, which is very suitable for ordinary users.

modes : 0.1%-3%-30%-100%  max current output is 6000mA

Its biggest advantage is that no frequency can be seen in any mode, and there is temperature management.

It can control the flashlight temperature not to exceed 55 degrees Celsius,

If the flashlight temperature is below 55 degrees Celsius, it will output full current. If it is above 55 degrees Celsius, it will constantly adjust the current so that the flashlight will not overheat.

 

Driver (sst40 12groups):

max current output is 6000mA

Its biggest advantage is that no frequency can be seen in any mode, and there is temperature management.

It can control the flashlight temperature not to exceed 55 degrees Celsius,

If the flashlight temperature is below 55 degrees Celsius, it will output full current. If it is above 55 degrees Celsius, it will constantly adjust the current so that the flashlight will not overheat.