LED: 1 * SST40 / SFT40 / 519A
Luminous flux: max 2400LM SST40 / 1800LM SFT40 / 1300LM 519A R9080
Mode: see detailed description later
Brightness memory: Yes
Battery: 1 * 21700 lithium batteryflat head without protection board (not included)
Material: aluminum alloy
Waterproof rating: IPX4
Switch type: electronic switch (with standby current)
Driver output current: max 6A
Charging port: TYPE-C charging interface, charging current 2A, the product does not include a charging cable.
Reflector type: smooth reflector for SST40 SFT40, orange peel reflector for 519A
Lens: ar-coated glass
Size: 27.3mm (diameter), 116.4mm (length)
Net weight of the flashlight: 88g (without packaging, batteries, headlight straps, and holding clips)
Product gross weight: 98g
Included accessories: 1*lanyard, 1*holding clip
Mode operation instructions:
1.click the button ——> flashlight is turned on with last brightness ——> press the button,brightness ramping up ——> release and press the button again,brightness ramping down
2.flashlight off, press the button ——> moonlight mode 0.01A (0.2%) [This brightness will not be remembered]
3.flashlight on or off, 2-click the button ——> turbo 100%
4.flashlight off,3-click the button ——> strobe
5.flashlight off,4-click the button ——> tactical mode, only 100% ,4-click the button again to quit tactical mode.
6.flashlight off,5-click the button ——> voltage detection (* means “flash” , *** pause ******* means 3.7V, )
7.flashlight off,6-click the button ——> normal ramping mode switch to 4modes 1%-10%-40%-100%
8.flashlight off,10-click the button ——> Lock mode,The flashlight will flash once under any operation, which means the flashlight is locked.10-click the button again to quit lock mode,Please note that this is the only way to unlock.
The flashlight has low voltage protection and temperature control protection.